CNC MILLING GSK 980MDi TPM SAKURA

Mesin CNC milling adalah mesin yang digunakan untuk memotong, membentuk, dan menghasilkan benda kerja dengan presisi tinggi menggunakan alat potong yang diputar pada kecepatan tinggi. Mesin CNC milling dapat digunakan untuk membuat berbagai bentuk dan ukuran benda kerja, dari komponen kecil hingga struktur besar.

Characteristics：
 Five axes control (X, Y, Z ,4th and 5th); 3 axes linkage; optional interpolation precision (1μm/0.1μm); maximum
speed 60m/min; optional axis types (linear axis or revolving axis) for the 4th and 5th axes; CS axis control
available for the 4th and 5th axes.
 Electronic gear ratio: (1～32767):(1～32767)
 Screw-pitch error compensation, backlash compensation, tool length compensation, tool abrasion compensation
and tool nose radius compensation.
 Embedded with PLC can be downloaded to CNC from PC.
 DNC function supports for real-time program transmission for machining.
 Be compatible with G commands of GSK980MC, GSK928MA, GSK980MD, GSK980MDc, executing the
cycle machining including drilling/boring, circle grooving/rectangular grooving, full-circle/rectangular finishing,
circular truncated cone/rectangular roughing, linear/rectangular continuous drilling, supporting spiral
interpolation, cylinder interpolation and polar coordinate command performing
 Spindle encoder tapping and rigid tapping can be detected during tapping cycle, so that high precision machining
can be performed.
 Supporting metric/inch programming with scaling on/off, programmable image and automatic chamfering
function
 Support statement macro command program, macro program call with parameters
 Supporting multi-additional coordinate system and local coordinate system
 Supporting PLC axis control function
 Chinese, English, Russian and Spanish display selected by the parameters.
 Full screen program editing; 40MB program capacity for storing up to 40000 of part programs.
 USB data communication; CNC system upgrading, machining programs reading through U disk and
bidirectional transfer between CNC and U disk.
 2-channel 0V～10V analog voltage output
 41 input interfaces/36 output interface meeting logical control requirements for disc tool magazine and bamboo
tool magazine
 Alarm log; multi-level passwords for equipment maintenance and management.
 Bidirectional transfer between CNC and CNC, CNC and PC; upgrade of CNC software and PLC programs;
 The installation dimensions and the electric ports are compatible with GSK980MD，GSK980MDc、GSK980MC